|
|
|
|
 |
FLEXIBLE RUDDER TAB SHAFT WRENCH
This simple wrench has proven very useful for working in the confinements
of the horizontal stabilizer through a small inspection door. Its specific
use is for tightening the hex nut that connects the flexible drive shaft to
90 deg drive of the rudder tab mechanism on Model AT-7, AT-11, C-45, SWB,
JRB, and Beech Model 18 airplanes.
This nut is accessible through the forward outboard inspection door on the
left hand side of the horizontal stabilizer.
This "Gimmick" can be cut easily from quarter-inch steel plate, according to
the dimensions on the drawing. |
|
|
|
